COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

D. Results of Testing/Servicing Software Version Installed: Diesel 132.00 Complete the following checklist: jE Yes ❑ No* Is the audible alarm operational? k) Yes ❑ No* Is the visual alarm operational? KI Yes ❑ No* Were all sensors visually inspected,functionally tested,and confirmed operational? 4 Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with their proper operation? ick Yes ❑ No* If alarms are relayed to a remote monitoring station,is all communications equipment(e.g.modem)operational? ❑ N/A 7 Yes ❑ No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment monitoring system Ki N/A detects a leak,fails to operate,or is electrically disconnected? If yes:which sensors initiate positive shut-down? (Check all that apply) USump/Trench Sensors; ODispenser Containment Sensors. Did you confirm positive shut-down due to leaks and sensor failure/disconnection? []Yes; ONo. 'i Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device(i.e. no mechanical overfill prevention PC WA valve is installed),is the overfill warning alarm visible and audible at the tank fill point(s)and operating properly? If so,at what percent of tank capacity does the alarm trigger? % Yes* )c No Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced and list the manufacturer name and model for all replacement parts in Section E,below. A Yes* C No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply)[]Product; pWater. If es,describe causes in Section E,below. xi Yes No* Was monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if applicable K, Yes No* Is all monitoring equipment operational per manufacturer's specifications? *In Section E below,describe how and when these deficiencies were or will be corrected. E. Comments: Diesel trans 1 and 2 sensor 794390-208 tested and passed. Monitoring System Certification Page of 12/07