COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

�iEGBVEU j z� ✓ / �/ ,� J ✓ Turbine Meter - Visually inspect the turbine meter for leaking at Ranges, proper operation (e.g. meter count) Control Valva - Visualty inspect the control valve for damage, leak controlled opening and closing H r__t+ TY DF: ARTS, ENT V Drain boxes/pump off systemslbuckets - Ensure boxes and buckets are empty. Make sure pump off system hose and flings are in good condition and gaskets are present and in good condition. Ensure there are no air leaks. ✓ ✓ / Drains - Ensure all drains are clear of debris that could inhibit Now or cause clogging. ✓ t/ V 1 l Locks and Seats - Ensure all locks and seals are in place on the meters, pre -amp housings and valves ✓ / Heat Sensors - Ensure the sensors are present and show no obvious signs of damage. Emergency Shutdown (ESD) - Ensure the ESD is clearly identified and labeled and there are no obstructions that would prevent access. �i Signage - Ensure loading procedures and current version of the Product Loading Sequence Chart (PLSC) are present and in good condition. Lights - Ensure they are present and show no obvious signs of damage. Ensure they tum on and off at the correct times to provide sufficient lighting. ✓ Canopy Rain Gutters - Ensure they are securely fastened and show no obvious signs of damage. Make sure the downspouts are not directing water into areas that could cause Injury or equipment damape -/ ✓ V I f Video Cameras - Ensure they are present and show no obvious signs of damage. Check monitor Inside to ensure they are working property, are in focus and are adjusted to provide maximum viewing. / ✓ f Intercoms - Ensure they are present and show no obvious signs of damage. ✓ V Eye Wash Stations - Ensure eye wash stations are clearly identified and labeled and there are no obstructions that would prevent access. ✓ t/ i Emergency Shower- Ensure shower is clearly identified and labeled and there are no obstructions that would prevent access. ` �( ✓ ✓ Deeco Screens - Ensure the screen is on and legible and shows no signs of damage. Ensure enclosure Is locked - �J' j V r ✓ / ✓ BOL Room - Ensure cleanliness, verify printer paper available for 80L and joumey plan printers, ensure RACS cabinet is locked Housekeeping - Pick up all trash and debris. Empty trash cans. M8N TUC WED THUR FRI SAT SUN D ITEM 0 0 0 D D D TTLR Back Pressurs Ga trtspection Inches of wator) ✓' f / J Lane 1- While trucks areloading, record the gauge reading. Make sure itis within the operating limits of your permit. ✓ ------- r,/ ---- Lane T- While trucks areloading record the gauge reading. Make sure itis within the operating limits of )Rpr ermit. / Lane 3- While trucks are loading. record the gauge reading. Make sure it is within the operating limits of your rmiI. d" / Lane 5 transmix-While trucks are loading, record the gauge reading, Make sun: it is within the operabog limits of your permit. Tanker Clverlili Protection (ex. Scully, Clvacon) v / ✓ Lights - Ensure all lights are working ,r Cords - Ensure there are no obvious signs of damage nicks, cuts, exposed wires). V I - Ensure bypass boxes are locked/sealed r Receptacle Ends -Ensure the end is in good condition and shows no signs of damage Look for pins in the sccket that are loose or stuck AddWve S m at acs, ac 3 Housing - Ensure housing is in good condition and shows no sign of damage Ensure unit is on, screen is legible and there are no alarms ✓ f / y Leaks - Check all valves fittings and connections for drips and leaks. Ensure all valves are in the proper position. Printers -Ensure rs are on, have of r, show nos s of dams and areForma - Ensure tha sufficient supply ofMS-1018 forms, that they are the most current revision and there is an exposted to help drivers to fill them out correctly ✓ 4 ✓ HVAC System - Ensure ACI-leat is set at the proper temperature and is working correctly Banta Terminal Ula -,-•,a�e:1 e_1 13/13