Laserfiche WebLink
04/02/2001 D11 Pont Page 3 of 5 <br /> Product Usage Data Sheet - 12375S <br /> Conventional 35 - 45 psi @ the gun <br /> HVLP 6 10 psi @ the gun cap <br /> 3.5 VOC <br /> HVLP 8 10 lbs @ the air cap <br /> Application <br /> Apply 2 medium-wet coats. <br /> Flash / Dry Times <br /> Force Dry <br /> Flash between coats: 3 - 7 minutes <br /> Flash before Force Dry: 0 minutes <br /> Cycle Time: *5 minutes @ 140°F metal temperature <br /> Time to Handle (Assemble) : when cooling <br /> Time to Polish: after a 10 minute cool <br /> Time to Stripe: after a 10 minute cool <br /> Time to Deliver: when cool <br /> Time to Decal : 24 - 48 hours <br /> *Most spraybooths will achieve 5 minutes @ 140°F metal temperature if set <br /> for a 15-20 minute force dry at 180°F. Some booths are equipped with high <br /> temperature lockouts. Consult your manufacturer for booth capabilities, <br /> maximum temperature settings, and sprinkler system activation temperatures. <br /> *Examples for proper bake cycles: <br /> Bake Cycle Temp(°F) <br /> 30 140 <br /> 25 150 <br /> 20 160 <br /> 15 180 <br /> 13 199 <br /> Air Dry Air Dry Air Dry (with V-389S) <br /> Flash between coats: 3 - 7 minutes 3 - 7 minutes <br /> Dust Free: 10 - 15 minutes 10-15 minutes (4.2 VOC) <br /> 45 minutes 35 minutes (3.5 VOC) <br /> Time to Handle (Assemble) : 4 - 6 hours 4 -6 hours <br /> Time to Polish: 4 - 6 hours 4 hours <br /> Time to Stripe: 4 - 6 hours 4 - 6 hours <br /> Time to Delivery: 4 - 6 hours 4 - 6 hours <br /> Time to Decal : 48 - 72 hours 48 - 72 hours <br /> Blending <br /> Panel repair is the approved procedure for clearcoat warranty repairs. This <br /> allows the refinisher to attain the recommended film builds. If the refinisher <br /> chooses to blend, use 19301S ChromaSystemTM Blender. <br /> - Carefully taper the second coat of clear beyond the first <br /> - After the final coat of clearcoat, step-out the coating by mixing 1 part <br /> 19301S Blender to 1 part of the remaining clearcoat and taper the blend with <br />