COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

04/02/2001 Du Pont Page 4 of 5 Product Usage Data Sheet - 12375S and clearcoat, further reduce the mixture and use the same gun to finish melting-in the edge. Tips for Success For sail panel blending, be sure 222S is applied beyond the intended clearcoat area. Recoatability / Re-repair Ultra Productive Clearcoat may be recoated during any stage of dry or cure. If recoating after 24 hours, scuff sand with 1200 - 1500 grit. Sanding, Compounding, Polishing Optimum Times Force Dry: after cool down Air Dry: 6 hours Sanding Use 1500 grit wet or finer or use a foam interface pad with P1500 DA or finer. Compounding Use finishing compound. Apply a thin ribbon of material to the area to be polished. Use a double-sided wool polishing pad or a foam pad. Maintain air polisher or variable speed buffer at 1800-3000 rpm. Remove excess finishing compound with a clean soft cloth prior to applying finishing polish. Polishing Use finishing polish (shake well before using) . Apply a ribbon of material to work a 2-3 foot square area. Use a foam pad or a terry cloth cover. Maintain a variable speed buffer or an orbital polisher at 1200-1800 rpm: Keep the polisher/buffer moving at all times. Overlap each pass approximately 50%. As finishing polish begins to dry, stop polishing. Wipe off excess finishing polish with a clean soft cloth. Hand buff with a clean soft cloth as a finish-ing touch. Tips for Success - Always use clean water to wet sand and add a few drops of soap to help clear the paper. - Always use a foam interface pad when DA sanding. - Do not use medium to heavy-duty compounds. Use clean cloths and pads to insure that the clear does not get scratched with dirt particles from old or re-used cloths or pads. - Do not wax for the first 120 days after painting. Physical Properties @ 4.2 lbs./gal . VOC @ 3.5 lbs./gal . VOC Theoretical Coverage: 655 sq. ft. per ready- 661 sq. ft. per ready- to-spray gallon at 1 mil to-spray gallon at 1 mil Weight Solids: 47.6% ready-to-spray 46.1% ready-to-spray with 2175S Volume Solids: 40.86% ready-to-spray 41.2% ready-to-spray Recommended Dry Film Thickness: 2.0 to 2.4 2.0 to 2.4 Flash Point: See MSDS See MSDS VOC Regulated Areas These directions refer to the use of products which may be restricted or require special mixing instructions in VOC regulated areas. Follow mixing and usage recommendations in the VOC Compliant Products Chart for your area.