Laserfiche WebLink
M <br />B - SEALING TOP TO BOTTOM <br />DURING HOT WEATHER - KEEP ALL SUMPS, SLURRY <br />AND RESIN SHADED AND OUT OF DIRECT SUNLIGHT UNTIL TIME OF <br />INSTALLATION. AM (MORNING) INSTALLATION IS RECOMMENDED. <br />13.1 - Get your Slurry Kit and tools together. Ensure surfaces inside and outside of the channel <br />and surrounding walls are clean of debris and COM P L E T E LY DRY! Also ensure that the <br />bottom edge of the top half has been abraded 3" up inside and outside and that it is uncontaminated <br />and dry. <br />EXPIRATION NOTICE! If stored in a cool, dry place, <br />EXPIRES this slurry may be usable past the 6 month expiration <br />date. After the above date, or if stored in direct sunlight <br />or above 80°F (resulting in a 3 month expiration), check <br />6 MONTHS all cans to ensure the resin cap is 100% liquid with no <br />lumps. For both exceptions, you use this slurry mixture <br />at your own risk. <br />SLURRY KIT DIRECTIONS <br />TEMPERATURE <br />SPECIAL DIRECTIONS <br />CATALYST AMT. <br />CURE TIME <br />Extreme Winter <br />Warm Interior of Sump and Slurry <br />1 Bottle (Winter) <br />8 Full Hours <br />44°F or lower <br />mixture to -�80°F before installation <br />UNDISTURBED <br />70°F+ = 4 hours <br />Winter Months <br />Warm Slurry mixture to <br />1 Bottle (Winter) <br />45-70°F = 8 hours <br />Ideal: 45-70°F <br />-80°F before installation <br />UNDISTURBED <br />AM installation recommended. <br />Summer Months <br />Keep sumps shaded and resin/ <br />Half Bottle (Summer) <br />4 Full Hours <br />Ideal: 71-100°F <br />slurry in a cool, shaded place until <br />UNDISTURBED <br />installation <br />Extreme Heat <br />AM installation recommended. <br />4 Full Hours <br />101 °F or higher <br />Keep sumps shaded and resin/ <br />Half Bottle (Summer) <br />UNDISTURBED <br />slurry refrigerated until installation <br />CATALYST (HARDENER) BOTTLES ARE LABELED FOR BOTH <br />WINTER AND SUMMER. THE LABELS WILL READ: <br />"WINTER SLURRY CATALYST" or "SUMMER SLURRY CATALYST" <br />4 ii -B7000 -SP -13A <br />