COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

The following is an itemized list of hazardous waste violations that have not been addressed for JUANS AUTO REPAIR as of August 10, 2015. Open violations from June 15, 2015 inspection Violation#116 - Failed to submit a written response within 30 days of receiving an inspection report. An inspection was last done on November 16, 2012 and an inspection report was issued identifying information to be submitted to bring this site into compliance. This information was required to be submitted by December 16, 2012. deficiency letter was issued on March 22, 2013. This information has not been received resulting in a non-compliant status for this facility. The outstanding violations include: -CCR 66262.34(f) Failed to completely label containers or tanks of hazardous waste -CCR 66262.34(d) Stored hazardous waste on site greater than 180 days An operator that receives an inspection report shall have 30 days to submit a written response that includes a statement documenting corrective actions taken or proposing corrective actions which will be taken. Ensure that a written response documenting corrective actions taken or proposed is submitted within 30 days of receiving an inspection report. Violation#202 -Disposed or caused disposal of HW at an unauthorized point. According to Mr. Rick Morga, metal fines generated from metal grinding are being recycled as scrap metal. No disposal records were available for the recycling of the metals fines. During the routine inspection conducted November 16, 2012, Ms. Nadine Morga stated that the metal fines would be handled as hazardous waste from then and would be disposed of by Evergreen Environmental. Hazardous wastes shall be disposed of only by transportatic to a permitted hazardous waste treatment, storage, and disposal facility(TSDF). Immediately cease disposal of hazardous waste metal fines as recyclable scrap metal and ensure that all future waste is hauled by a licensed hazardous waste transporter to a permitted TSDF. Violation#403 -Failed to keep hazardous waste containers closed except when adding or removing hazardous waste. The used oil tank was observed with a large rectangular piece cut from the top and folded back. According to Ms. Morga, this was done at the request of the hazardous waste hauler to allow easier access for pumping out the waste All hazardous waste containers shall be closed at all times except when adding or removing waste. Immediately close this container and ensure all hazardous waste containers are closed when not adding or removing waste. Violation #406 -Contaminated container not marked with date emptied or managed within one year of being emptied. A 55 gallon black steel drum which previously held used antifreeze was observed outside the shop with no empty labeling. A 55 gallon blue steel drum and a 20 gallon yellow steel drum were observed in the hazardous waste storai, area with empty labeling placed on them during the 2012 inspection. The drums were labeled "empty 9/3/12". Containers larger than five gallons that previously held a hazardous material shall be marked with the date they were emptied and managed within one year of being emptied. Immediately mark and manage all empty containers per thi section. Violation#601 -Stored hazardous waste onsite greater than 180 days. A 55 gallon black steel drum of used absorbent was observed in the hazardous waste storage area. This drum was observed on site during the 2012 inspection. Facilities who generate less than 1000 kg of hazardous waste per mon and do not exceed 6000 kg of waste stored on site at any time may store waste on site up to 180 days. Immediately contact a licensed hazardous waste hauler to dispose of this waste under manifest and submit a copy of the manifes to the EHD. Page 1 of 2