COMPLIANCE INFO 1988 - 2015 - Laserfiche WebLink

Home Browse Search

209-477-2440 W. T_ HULL & CO-/ PNE 790 P24 JRN 28194 11:U1 • 0 TASK 10.0 - REMOVAL OF CEILING PCPING AND VENTILATION DUCTS The piping and ventilation ducts attached to the ceiling of the facility will be removed for disposal. Ladders and scissor lifts will be provided to access the ceiling and roof rafters were the piping and ventilation ducts are fastened. Once removed, the piping and ventilation ducts will be steam cleaned using a high-pressure steam washer. The rimate generated during the steam cleaning process will be pumped into vacuum trucks for transportation and disposal. Once the piping and ventilation ducts have been steam cleaned, the piping and ventilation ducts will be placed into hazardous waste roll-off bins for transportation and disposal. Ceiling piping and ventilation ducts that have been deemed non-hazardous through steam cleaning activities will be placed into a 40-cubic yard bin for disposal at a Class III disposal facility. TASK 11.0 - BEAD BLASTING OF CONCRETE FLOORS The concrete floors that are still stained with chemicals and contaminants after the steam cleaning activities have been completed will be cleaned using a bead blasting method. C.K.C.lAllwaste proposes to remove the visually stained concrete using a Blastrac machine. Material removed is vacuumed up by the Blastrac and conveyed through a 50-foot hose into a cyclone separator. Aust escaping the separator is conveyed into a dust collection system. All material cleaned from the floor surface will be place into a hazardous waste stickered roll-off bin for transportation and disposal. TASK 12.0 - REMOVAL NON-HAZARDOUS MATERIAL AND DEBRIS Non-hazardous material and debris such as paper, garbage, wood, etc. present throughout the site and is not impacted by chemicals will be placed into 40-cubic yard bins for disposal at a Class III disposal facility. TASK 13.0 - DISPOSAL OF HAZARDOUS CHEMICALS AND CONTAMINANTS AND NON-HAZARDOUS MATERIAL AND DEBRIS Characterization and preliminary acceptance for disposal of the hazardous chemicals and contaminants will have been completed during Task 5.0. Therefore, we anticipate that the hazardous chemicals and contaminants will be transported for disposal or recycling at the proper disposal facilities immediately following completion of the removal activities. All non-hazardous material and debris will be disposed of at a Class III disposal facility.