Laserfiche WebLink
Scene connection or welding of water or steam pipelines should be subject to the standards to <br />ensure the safety and reliability with no dropping or leakage. <br />The magnetic turning column level gauge must be installed vertical (See Fig. 12-3 below) to <br />ensure the magnetic float move freely up and down in the main duct; <br />Valves are provided between the magnetic turning column level gauge and the upper and lower <br />liquid introducing tubes of the agentia tank so as to cut off the agentia solution during the <br />cleaning and overhaul; <br />No magnetizer is permitted near the drum body of the magnetic turning column level gauge, or <br />otherwise, the normal operation of the gauge may be affected. <br />M 12-3 Fig. 12-3 Magnetic Turning Column Level Gauge <br />and Installation Diagram <br />454ZATiitff RR 12-4 FfiT), rV �U R „ tyf NNfHA[M -4-7I1, 4 *AM 1c5c---1rT <br />As for the float ball level gauge (See Fig. 12-4 below), check that the retainer rings and <br />fasteners are firm before installation to avoid measurement failure or dropping of the <br />magnetic float. During the installation, keep the gauge vertical to ensure that the float ball <br />float freely up and down. <br />31 <br />