Laserfiche WebLink
DORS A ri <br />WL�ZR*44941*4PR%�49 CH <br />Always clean up the machine tool, in order to ensure the machining accuracy and the service <br />life of the machine tool. <br />Long-term use of the machine should not cut off the power, the relative motion of each <br />surface to be coated with grease. <br />18.5.4 X-'7F7fflI S OPERATION AND ADJUSTMENT <br />Complete the foundation according to the machine tool foundation. <br />AVVRM1,MP-� , &iE71c-T&o <br />Adjust the Machine foot bolts, calibration level. <br />Electrical control box installed by professional electrical personnel, and link the electrical <br />wiring to the electrical control box according to the machine tool foundation drawing. <br />01*1*Wff� <br />Connect the main power,turned on the power switch , jog grinding down limit switch, check <br />the direction of travel , If in the opposite direction, you need to swap the main power line <br />click. <br />Note that don't open first grinding head start switch to prevent reversal. <br />��,Ilfcs4'p�1r� #Tfgf, )n9�^ F# <br />The machine drive belt and saddle connections for elastic connection.Vibration machine work <br />appears commutation, then slightly loosen the nut under three springs.When the belt occur <br />serious slippage,then slightly tighten the three springs under the nut. <br />7Jf-'c—�iT7a 77�iJJ a �llE�, }SIA ��1'C�F�c,F r�i <br />62 <br />