Laserfiche WebLink
DVRETE <br />CH <br />The electrical signal and control device as well as their connection shall be checked to ensure <br />they are correct; <br />The motor shall be started up to check whether the operation direction is correct; <br />The equipment shall be checked to ensure it is in stable operation and whether there is any <br />noise; <br />The operators shall not put the hands into the parts operating at a high-speed to avoid <br />accident; <br />Feeding shall follow normal operation after startup to avoid blockage of friction machine and <br />dryer and effect on normal production; <br />Open the observation opening of dryer and wash the powder clung on the mesh inside the <br />dryer when a shift is over to avoid affected drying effect and increased load of the dryer by <br />mesh blockage. <br />The general power shall be cut off during equipment cleaning to ensure safety. <br />21 Y,7, & * 7G RINSING UNIT <br />�K 21-1Table 2 1 -1 <br />1 *M *.#I/Drive Motor <br />88 <br />