Laserfiche WebLink
BOREM <br />CH <br />The flanges connected to the feeding inlet and the discharging outlet shall be closely joined <br />and rubber washers shall be laid between flanges to prevent feed and water leakage; <br />The flanges connected to the air duct and the cyclone dust collector shall be closely joined <br />without any clearance and rubber washers shall be fitted between flanges to prevent air and <br />feed leakage. <br />20.3 JIVO"Wj�,► OPERATION PRECAUTIONS <br />S ii'; <br />1 TV1TA- #73f�1<AA81MeQ, n A1�9M-Lf f, 4n, VAI]M L tg& on <br />Prior to commissioning, in addition to compliance of 'installation with technical requirements, <br />the following inspections shall be carried out: <br />Each fastener shall be checked to ensure it is firmly tightened; <br />The belts of friction machine and dryer shall be checked to ensure the tightness degree is <br />proper; <br />The flexibility of rotors of friction machine and dryer shall be checked to ensure the bearings <br />at the two ends are lubricated enough; <br />87 <br />