Laserfiche WebLink
Prior to installation, the equipment installation techniques and drawing requirements shall be <br />understood, and the equipment shall be installed as the location and dimension specified in <br />the drawing; <br />No strike to the equipment shall be allowed during elevation and handling in installation, to <br />prevent equipment deformation and damage; <br />Prior to installation, an overall inspection shall be carried out on each part of the fan to ensure <br />the machine parts are intact and whether the drive unit is flexible; after installation, the <br />equipment housing shall be inspected to make sure there is no tool or impurity dropped or left <br />inside and the fan is level; <br />During installation of storage bin, the rack shall be assembled in accordance with the noted <br />sequence numbers without connection by force; <br />The flanges connected to the air duct and fan shall be closely joined without clearance to <br />prevent air and feed leakage; the flanges shall be closely connected to air duct and rubber <br />washers shall be fitted between flanges to prevent air and feed leakage; <br />Electrical wiring shall be conducted as the drawing of electric cabinet, and the power output <br />terminal of the electric cabinet and the connecting terminal of the equipment drive motor shall <br />be connected in line with the wire marking. <br />23.3 fila tzT),, OPERATION PRECAUTIONS <br />-�i-AI1T-t#[MM-4 'rt; <br />hj'cA;J�k .w�; <br />97 <br />