Laserfiche WebLink
DVi\.C.l E <br />CH <br />Eddy current non-ferrous separator is designed that which is based on a conductor in a <br />high frequency alternating magnetic field in principle to generate an induced current. When it <br />works ,then the magnet roller in the sorting surface of the high -frequency will generate the <br />high magnetic field.when a conductive non-ferrous metals pass the magnetic field, then eddy <br />currents will be generated in the metals.the eddy current will generate magnetic force which <br />is opposite to the original the magnetic metals in a direction(such as aluminum, copper, etc.) <br />Non-ferrous metals will be along the conveying direction leap forward, owing to repulsion of <br />the magnetic field .it will achieve the separation from non-metallic materials ,and finish the <br />purpose of sorting;The main distinction is based on the ratio of the value of the conductivity <br />and density of material, it will separate easily for the high ratio <br />30.2 INSTALLATION PRECAUTIONS <br />When installed base to the level of vibration and padded mats, are not allowed tilt <br />The control cabinet to find a suitable location to place fixed, according to the control cabinet <br />of drawings for electrical wiring, power output terminal of the control cabinet and sorting <br />machine terminals in accordance with the line number to connect. <br />30.3 38 % MA OPERATION PRECAUTIONS <br />PcX h � L a7 i# T77l TT i , A'( MOT : <br />After the installation is complete you can run the debugger, follow these steps: <br />A-01, 4ZXA TCkLvi;�)�IIPGE ; <br />The belt drive motor is energized to see the running direction is correct, if the opposite <br />rotation direction, swap any two of the power input cable, power running in the right direction <br />again to confirm; <br />I' 1_31TlW (AV�fah, 30.4 ) , 4 A"rj� 41 P,51� 30 33 x' �%± i aT; <br />126 <br />