Laserfiche WebLink
' DATA QUALIFIERS <br />' B - Indicates the compound was found is the blank and the sample <br /> E - Concentrations exceed calibrauou range of the instrument. <br />' I - Indicates Interference. <br />' Y - Indicates an estimated value for either a TIC or an analyte that meets the identification cntena but <br /> the result is less than the specified reporting limit. <br /> T - Indicates the compound was found in the TCLP extraction blank and the sample. <br /> Iu - Indicates an inorganic compound was analyzed for but not detected. <br />' U - Indicates an organic compound was analyzed for but not detected. <br /> BS - Indicates matrix analyses were conducted on reagent grade water <br />' BSD- Blank Spike Duplicate <br /> BDL- Below Detection Lem, <br /> D - Indicates that surrogate/matrix spike recoveries were not obtained because the extract had to be diluted <br /> for analysis. <br />' DL - Indicates a secondary dilution <br /> DF - Dilution factor <br />' LC,S- Laboratory Control Sample <br />' MB - Method Blank <br /> MS - Matrix Spike <br />' MSD- Matrix Spike Duplicate <br /> NA - Not Applicable <br /> IX - Result is by calculation <br />' NS - Not Spiked 'Result was outside advisory limits_ <br /> NC - Not Calculated <br /> t NR - Not Required <br /> NOTES <br />' Solid,sediment and sludge results are reported on a dry weight basis except when analyzed for Landfill deposal <br /> parameters (such as mcmeration or Illinois Green Sheet parameters) All other mg/kg results arc reported on <br /> an 'as received'basis. Reporting limits are detection limits adjusted for sample size used, dsluuons made, apd <br />' m the case of dry weight results, the moisture content of the sample. <br />