Laserfiche WebLink
Shell Rotella T3 15W-40 <br /> MSDS# 10996DA <br /> Version 1.3 <br /> 0:7Effective Date 04!04/2014 <br /> Materia( Safety Data Sheet According to OSHA Hazard Communication Standard,29 CFR <br /> 1910.1200 <br /> to avoid environmental contamination. Prevent from spreading <br /> or entering drains, ditches or rivers by using sand, earth, or <br /> other appropriate barriers. <br /> Clean Up Methods Slippery when spilt. Avoid accidents, clean up immediately. <br /> Prevent from spreading by making a barrier with sand, earth or <br /> other containment material. Reclaim liquid directly or in an <br /> absorbent. Soak up residue with an absorbent such as clay, <br /> sand or other suitable material and dispose of properly. <br /> Additional Advice Local authorities should be advised if significant spillages <br /> cannot be contained. <br /> 7. HANDLING AND STORAGE <br /> General Precautions Use local exhaust ventilation if there is risk of inhalation of <br /> vapours, mists or aerosols. Use the information in this data <br /> sheet as input to a risk assessment of local circumstances to <br /> help determine appropriate controls for safe handling, storage <br /> and disposal of this material. <br /> Handling Avoid prolonged or repeated contact with skin. Avoid inhaling <br /> vapour and/or mists. When handling product in drums, safety <br /> footwear should be worn and proper handling equipment <br /> should be used. Properly dispose of any contaminated rags or <br /> cleaning materials in order to prevent fires. j <br /> Storage : Keep container tightly closed and in a cool, well-ventilated <br /> place. Use properly labelled and closeable containers. Store at <br /> ambient temperature. <br /> Product Transfer This material has the potential to be a static accumulator. <br /> Proper grounding and bonding procedures should be used <br /> during all bulk transfer operations. <br /> Recommended Materials For containers or container linings, use mild steel or high <br /> density polyethylene. <br /> Unsuitable Materials PVC. <br /> Additional Information Polyethylene containers should not be exposed to high <br /> temperatures because of possible risk of distortion. <br /> 8. EXPOSURE CONTROLSIPERSONAL PROTECTION <br /> Occupational Exposure Limits <br /> Material Source Type ppm m9/m3 i Notation <br /> I Oil mist, ACGIH TWA(Inhalabl 5 mg/m3 <br /> jmineral a fraction.) <br /> i <br /> Oil mist, OSHA Z1 PEL(Mist.) 5 mg/m3 <br /> mineral <br /> Biological Exposure Index(BEI) <br /> No biological limit allocated. <br /> 3/10 <br /> Print Date 09/30/2014 000000014557 <br /> MSDS US <br />