Laserfiche WebLink
Whenever an alarm is activated, station personnel are to immediately: <br /> a. Contact ARCO Maintenance or its designated agent by using the telephone number previously <br /> provided. <br /> b. If any visible indications of petroleum products or vapors are noticed call 911. <br /> C. Make an entry in the Recordable Discharge Log(Form APPC-765-1: attached) indicating the <br /> action taken. <br /> d. Complete the Recordable Discharge Log when and as the source of the alarm is known. <br /> ARCO RESPONSIBELITIES <br /> B. METHOD OF REMOVING AN UNAUTHORIZED RELEASE FROM THE SECONDARY <br /> CONTAINMENT <br /> a. Any unauthorized release into the secondary containment system of a product tank will be <br /> removed by pumping. Uncontaminated product may be returned to the tank. Contaminated <br /> product may be returned to the refinery to be recycled or may be disposed of following <br /> procedures in accordance with California Health and Safety Code requirements. In the event <br /> of an emergency, a pumping contractor or truck will be available immediately. In all other <br /> cases, equipment availability will be within 12 hours. <br /> b. Any unauthorized release in the secondary containment system of a used oil tank will he <br /> pumped and disposed of following procedures in accordance with California Health and Safety <br /> Code requirements for used oil disposal. <br /> CM ARCO Maintenance will be responsible for authorizing and selecting contractors for the work <br /> to be performed. <br /> 5. TRAINING <br /> In addition to the training covering subjects mentioned in Sections 3 and 4 above, training needed for the <br /> operation of the tank system and monitoring equipment includes: <br /> How to: <br /> - Take tank level measurements <br /> - Read dispenser meters <br /> - Inspect equipment <br /> - Recognize warning signs: dispenser hesitations, meter spins and odors <br /> - Manually close dispenser impact valve <br /> - Replace dispenser filters <br /> - Shut down the system with and location of: ARCOmatic switch, electrical panel breakers, and <br /> emergency shut off switch <br /> - Test the electronic monitor <br />