Laserfiche WebLink
D. Results of TestinglServicing <br /> Software Version Installed 421 <br /> Complete the following,checklist: <br /> J Yes No' s the audible alarm operational? <br /> J Yes No' s the visual alarm operational? <br /> J Yes No' Nero all sensors visually inspected,functionally tested,and confirmed operational? <br /> J Yes No' Nere all sensors installed at lowest point of secondary containment and positioned so that other equipment wiil not interfere with thei <br /> ro er operation? <br /> J Yes No' If alarms are relayed to a remote monitoring station,is all communications equipment(e.g.modem)operational? <br /> NIA <br /> Yes No' For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment monitoring system <br /> J NIA detects a leak,fails to operate,or is electrically disconnected? if yes: which sensors initiate positive shut-down? (Check all tha <br /> apply) D Sump[Trench Sensors; []r Dispenser Containment Sensors.Did you confirm positive shut-down due to leaks aad sensor <br /> failure/disconnection? x Yes; x No. <br /> Yes No` For tank systems that utilize the monitoring system as the primary tank ovetfiIl warning device(i.e.no mechanical overfill prevention <br /> J NIA valve is installed), is the overfill warning alarm visible and audible at the tank fill point(s)and operating properly? if so, at what <br /> ercent of tank capacity does the alarm trigger? 90 % <br /> Yes' J No Nas any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced and list the <br /> anufacturer name and model for all replacement parts in Section E,below. <br /> Yes' J No Nas liquid found inside any secondary containment systems designed as dry systems? (Check all that apply)M Product; []Water. <br /> If yes,describe causes in Section E,below. <br /> J Yes No. as monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if applicable <br /> J Yes No` Is all monitoring equipment operational per manufacturer's specifications? <br /> "In Section E below,describe how and when these deficiencies were or will be corrected. <br /> E Comments: The sensors were tested and BME confirmed seeing the alarms remotely. <br /> Monitoring System Certification Page 2 of 4 12107 <br />