Laserfiche WebLink
area is level, free of ruts and not <br />too soft. Communicate with the <br />operator loading the truck to <br />ensure that the load is centered. <br />Ensure that the truck is not <br />overloaded. OE Tenet 7. <br />9 Dump load. Equipment damage, injury or death- <br />lvel Ensure the truck is on rutsstable, <br />removed. <br />truck tip, excavation collapse; <br />overhead utilities; failing to remain <br />Inspecta for rear <br />nsb es <br />alert, complacency <br />that pbncturother tire <br />or otherwise cause dumping to be <br />unsafe. Inspect area for overhead <br />power or other lines and mark. <br />Ensure that no people or <br />equipment are in the tip radius of <br />the truck before dumping. Place <br />truck in park, set parking brake, <br />lift up on the lever that starts the <br />bed up. Once the bed is fully up, <br />place the truck in drive. <br />Disengage parking brake and <br />slowly pull forward until bed is <br />empty. STOP MOVING and lower <br />the bed. ALWAYS watch the bed <br />lower in mirrors. Do not continue <br />forward until the bed is down <br />completely. Always remain alert <br />while operating the truck. OE <br />Tenet 4 and 8. <br />p complete task and Unexpected movement of truck; slips, <br />Park truck on level n a <br />safe area. Engage parking ng nd ibrake. <br />exit truck. trips, falls <br />Turn off and remove key. <br />Dismount using 3 point contact. <br />Ensure adequate spacing. Walk <br />around truck inspect for damage. <br />OE Tenet 5. <br />