Laserfiche WebLink
• Page 2 of 4 <br />1. SECONDARY PIPE TESTING <br />Test Method Developed By: ❑ Piping Manufacturer Z Industry Standard ❑ Professional Engineer <br />❑ Other (Specify) <br />Test Method Used: Pressure ❑ Vacuum ❑ Hydrostatic <br />[] Other (Specifi) <br />Test Equipment Used: See attached testing procedures <br />Equipment Resolution: <br />Piping Run # 91 <br />Piping Run # <br />Piping Run # <br />Piping Run # <br />Fiberglass <br />Piping. Material: <br />Piping Manufacturer: <br />Smith <br />Piping Diameter: <br />3" <br />Length of Piping Run: <br />Approx 200' <br />Product Stored: <br />Premium (91) <br />Method and location of <br />piping -run isolation: <br />Test boot in Sump <br />_ <br />Wait time between applying <br />pressure/vacuum/water and <br />starting test: <br />30 minutes <br />Test Start Time: <br />9:28am <br />Initial Reading (R,): <br />5 psi <br />Test End Time: <br />10:28am <br />Final Reading (RF): <br />5 psi <br />Test Duration: <br />1 hour <br />Change in Reading (RF-Rj): <br />0 <br />Pass/Fail Threshold or <br />Criteria: <br />0.00 <br />0.00 <br />0.00 <br />0.00 <br />'fest Result: <br />❑Pass ElFail <br />Pass ElFail <br />ElPass ElFail <br />❑ Pass E] Fail <br />Con) nients —(include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />