COMPLIANCE INFO_2016-2018 - Laserfiche WebLink

Home Browse Search

;SEI® SEP 2 2 2016 6. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer ® industry StandardTtm. De `I Fn¢i+a ❑ Other (Spec) YYFHi Mt Test Method Used: ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other (Spec) Test Equipment Used: Incon Sump Tester Equipment Resolution: +/- 0.002" STP Sump # 87 STP Sump # 91 Sump Diameter: 42" 42" Sump Depth: 56" 56" Sump Material: Fiberglass Fiberglass Height from Tank Top to Top of Highest Piping Penetration: is" 18" Height from Tank Top to Lowest Electrical Penetration: 21 22 Condition of sump prior to testing: Good Good Portion of Sump Tested' 2" above piping 2" above piping Does turbine shut down when sump sensor detects liquid (both product and water)?* ❑ Yes ❑ No ®NA ❑ Yes ❑ No ®NA Turbine shutdown response time N/A N/A Is system programmed for fail-safe shutdown?* ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA Was fail-safe verified to be operational?* ❑yes ❑ No ®NA ❑Yes ❑ No ®NA Wait time between applying pressure/vacuum/water and starting test: 30 minutes 30 minutes Test Start Time: 10:57 am 11:51 am Initial Reading (Ri): 6.3691 5.3913 Test End Time: 11:12 am 12:06 pm Final Reading (Rr): 6.3695 5.3912 Test Duration: 15 min. 15 min. Change in Reading (Rr-R): 0.0004 0.0001 Pass/Fail Threshold or Criteria: +/-0.002" +/-0.00211 Test Result: O Pass ❑ Fail 17 Pass ❑ Fail Was sensor removed for testing? ®Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testis ? R yes ❑ No ❑ NA N Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommendedfollow-up for failed tests) "Sensor functionality was not confirmed. This procedure is not part of the Secondary Containment testing scope of work". 1 If the entire depth of the sump is not tested, specify how much was tested. If the answer to any, of the questions indicated with an asterisk (*) is "NO" or "RIA", the entire sump must be tested. (See SWRCB LG -160)