Laserfiche WebLink
Oct 02 08 11:40a Reliable Petroleum 209-845-8953 p.14 <br /> 0 <br /> Installation Guide Installation Procedure <br /> �_-. _,.gin: .....re.».:._�f-�:��-:T:r�-,�:�-.�,ta,xiw�a=se=z--::.��r •=vc_�: :<�—.•:. ,. �� •�.a»�xx <br /> Top view <br /> FXV detector installs <br /> in 2" port <br /> a <br /> 1/4" NPT tubing <br /> fitting installs in L____' <br /> Tank Vent port <br /> < Side view <br /> f <br /> I <br /> �--'—� rypm`srlxr epi <br /> Figure 2. Installing FXV in The Red Jacket pump <br /> For FX2V models <br /> a. Remove 114-Inch pipe plug from tank test port (on 6-inch Big-Flo applications, remove the 1/4-inch <br /> pipe plug from the riser/flange assembly, for The Red.Jacket pumps see Figure 3 ). <br /> b. Apply a UL-classified non-toxic pipe thread sealant to the 1/4-inch NPT 45-degree elbow and install in <br /> tank test port (on 6-inch Big-Flo applications, the 114-inch NPT 45-degree elbow may be installed into <br /> the riser/flange assembly. <br /> c. Apply UL-classified non-toxic pipe thread sealant to the 114-inch NPT hex nipple and install on 45- <br /> degree elbow that is in the tank test port (or on 6-inch Big-Flo riser/flange assembly). <br /> d. Apply a UL-classified non-toxic pipe thread sealant to the 114-inch NPT tee and install on the hex <br /> nipple to accommodate both the vent tube and the snap tap. <br /> e. Apply a UL-classified non-toxic pipe thread sealant to the threads of the 114-inch NPT 90-degree <br /> elbow vent tube fitting and install in the tee. <br /> f. Apply a UL-classified non-toxic pipe thread sealant to the threads of the 1/4-inch NPT straight vent <br /> tube fitting and install in the leak detector vent opening in the cap of the leak detector. <br /> g. Install the vent tubing into both fittings and tighten per instructions on package. <br /> h. To install snap tap connectors in FX2V/FX2DV models,apply a UL-ciassified non-toxic pipe thread <br /> sealant to the snap tap connectors and install one in the body of the FXV leak detector and the other <br /> in the tee attached to the hex nipple attached to the 45-degree elbow installed in the tank test port. <br /> On 6-inch Big-Flo applications, install the two snap tap connectors — one in the body of the FXV leak <br /> detector and one in the riser/flange assembly. <br /> 4 <br />