INSTALL_2008 - Laserfiche WebLink

Home Browse Search

Muniappa Na.idu, Sr. REHS San Joaquin County Environmental Health Department -2- February 6, 2008 2. Provide additional information regarding the "automatic fare suppression device" (TI), include Underwriters Laboratory (UL) or third party approval for the device. Response: Enclosed is a package of manufacturer's cut sheets further describing the Pisces automatic fire suppression system. The system must be installed in accordance with NEPA 30A, 2000 edition. 3. Dual float is required on the annular sensor. Submit appropriate changes to the plan. Response: Changes have been made to Drawing Sheets T2, T5, and T7. 4. As per our telephone conversation, provide drawings of storm water drainage around the dispensers, and details on any oil/water separator used at the facility. Response: Enclosed are Sheets C-1 through C-4 of the site improvement plans, prepared by Kier and Wright, dated September 27, 2007. The storm structure schedule on Sheet C2 depicts the location of the oil/water separator on the project site. 5. Provide additional information on the Bravo Under Dispenser Containment (UDC). Specify if the entire UDC is UL listed. Response: Enclosed is a copy of RHL Design Group, Inc.'s third party engineering evaluation, dated August 20, 2003, and amended September 17, 2004. /U. Explain the reason for using discriminating and non -discriminating sensors at different monitoring locations. Make sure that the requirements of California Code of Regulations (CCR) section 2636 (f) and section 2630 (d) is met. Response: We have reviewed the requirements of CCR Sections 2636(f), 2630(d), and the enclosed plans have been designed in compliance with these requirements and the requirements of Section 2638. Our client, Costco Wholesale, has extensive experience in locating the sensors so as to best manage the risk of a leak. 7, Provide UL or third party approval for the sumps used on the tanks. Response: The UL listing for the Sumps is 1316; enclosed is a copy of the listing. 8. The Veeder Root PLLD model 848480-001 is to he used with flex piping only. Provide the correct Line Leak Detector for the UST system. Also include the length of pipe used in the system. Response: No changes have been made to the plans. The Veeder-Root Application Guide is enclosed and has been highlighted to indicate the applicable PLLD. All product lines are 2 - inch ID. Tank 1 has 175 feet of piping downstream of its PLLD; Tank 2 has 180 feet, and Tank 3 has 192 feet. Each PLLD line is, therefore, within the maximum 500 -foot length for PLLDs in fiberglass 2 -inch piping systems.