Laserfiche WebLink
r <br /> S WRCB,January 2002 Page of <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps X ----- <br /> Riser Containment Sumps are Present, but were Not Tested _ <br /> Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard Professional Engineer <br /> ❑Other(Specify) <br /> Test Method Used: ❑ Pressure ❑Vacuum Hydrostatic <br /> ❑Other(Spec) <br /> Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: <br /> Fill Sump# Fill Sump# Fill Sump tl Fill Sump it w. <br /> Sump Diameter: -- - -i <br /> Sump Depth: — ,I <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: -- <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: --- <br /> Condition ofsump prior to <br /> testing: -- <br /> Portion of Sump Tested <br /> Sump Material: --- Q <br /> Wait time between applying <br /> water and starting test: --- <br /> Test Start Time: <br /> Initial Reading(Rj): -- <br /> Test End Time: <br /> Final Reading(RF): <br /> Test Duration: ---- <br /> Change in Reading(RF-Rj): --- <br /> Pass/Fail Threshold or Criteria: -- <br /> Test Result: Pass ❑Fail Pass ❑Fail Pass ❑Fail ❑ Pass ❑ Fail <br /> Is there a sensor in the sump? Yes ❑No Yes D No Yes ❑No ❑Yes C No- <br /> Does the sensor alarm when <br /> either product or water is Yes ❑No ❑NA Yes ❑No ❑NA Yes ❑No ❑NA ❑Yes ❑No 'NA <br /> detected? <br /> Was sensor removed for testing? Yes ❑No ❑NA Yes ❑No ❑NA Yes ❑No ❑NA ❑Yes ❑No �,NA <br /> Was sensor properly replaced and Yes 11 No 11 NA Yes ❑No ❑NA Yes ❑No ❑NA ❑Yes ❑No CNA <br /> verified functional after testin ? <br /> Comments- (include information on repairs made prior to testing, and recommendedfollow-up for failed tests) ____ <br />