Laserfiche WebLink
Page 4 of 14 . • ESR-1917 <br /> construction provided that at least one of the following 6.0 EVIDENCE SUBMITTED <br /> conditions is fulled: 6.1 Data in accordance with the ICC-ES Acceptance <br /> • Anchors are used to resist wind or seismic forces only. Criteria for Mechanical Anchors in Concrete Elements <br /> • Anchors that support a fire-resistance-rated envelope (AC193),dated January 2007(ACI 355.2). <br /> or a fire-resistance-rated membrane are protected by 6.2 A quality control manual. <br /> approved fire-resistance rated materials, or have <br /> been evaluated for resistance to fire exposure in 7.0 IDENTIFICATION <br /> accordance with recognized standards. <br /> The anchors are identified by packaging labeled with the <br /> • Anchors are used to support nonstructural elements. manufacturer's name (Hilt, Inc.) and contact information, <br /> 5.14 Use of zinc-coated carbon steel anchors is limited to anchor name,anchorsize,evaluation report number(ICC-ES <br /> dry,interior locations. ESR-1917), and the name of the inspection agency <br /> (Underwriters Laboratories Inc.).The anchors have the letters <br /> 5.15 Special inspection must be provided in accordance with Kli embossed on the anchor stud and four notches <br /> Section 4.4. embossed into the anchor head, and these are visible after <br /> 5.16 Anchors are manufactured by HIM AG, in Schaan, installation for verification. <br /> Liechtenstein, under a quality control program with <br /> inspections by Underwriters Laboratories Inc.(AA-637). <br />