INSTALL_2002 - Laserfiche WebLink

Home Browse Search

Turbine • OF Watertight FRP Turbine Enclosure (WTE) Suitable for moderately high groundwater The Watertight FRP Turbine Enclosure includes an FRP enclosure body (variable length in 12"increments, 42" or 48" 1D), an FRP reducer (42"x 30" or 48"x 30" ID's) with o-ring groove and o-ring gasket, and a push-on FRP lid (32.5" OD) with 2 handles. The enclosure body is field cemented to the tank collar and the reducer is field cemented to the enclosure body using the supplied adhesive kits (Kit AD, 2 kits required). The reducer/ 4r F :• 3�. '" ro ®:. enclosure body joint is on the exterior of the kw, enclosure body allowing easy field installation of the adhesive without entering the enclosure. The lid compresses the lubricated o-ring when it is pushed onto the reducer top, providing a watertight seal with water up to 12" over the lid. The lid can be pushed into position by standing on the lid, which is made with a non-skid exterior surface. The lid includes two handles. One is offset to aid in the SEALED removal of the lid and the other is centered on the lid. 112 The 30" opening allows for the removal of a 22" manway lid (28" OD). The enclosure must be vented { at all times (usually accomplished with the double- Watet ht EPP TurWne Enclosure P g _ wall piping). Sealed FRP Turbine Enclosure(STE) Suitable for extremely high groundwater conditions The Sealed FRP Turbine Enclosure includes an FRP enclosure body (variable length in 12" increments, 42"or 48" ID's), an FRP reducer(42"or 48" ID's)with.an oval flanged manway(23"x 29" ID's), a flat gasket, SS bolts with non-galling silicone-bronze nuts (optional bolt rings can be supplied to replace the bolts), and an oval FRP lid with handle. The enclosure body is field cemented to the tank collar and the reducer is field cemented to the enclosure body using the optional adhesive kits (Kit AD, 2 kits required). The reducer/enclosure body joint is on the exterior of the enclosure body allowing easy field installation of the adhesive without entering the enclosure. 'ashRUMVINI PAIil; The lid is bolted to the manway with 14 bolts providing `... `. r a watertight seal with water up to 7' over the lid. The lid can be supplied with an optional 6" NPT fitting with µ a plug which can be used as an observation port. The oval manway allows for the removal of a 22" manway k SFAIED lid (28 OD). The enclosure must be vented at all times 4�ivasINr , r (usually accomplished with the double-wall piping). L ENCLOSURL BODY FIELD CONTAMENT COLLAR —SEALED JOINT Sealed FRP Tullne Enclosure: TANK WALL + -- 2,