Laserfiche WebLink
As early as 1959,RedJacket developed and marketed capability. All elastomers in the XLD are now compatible <br /> a mechanical leak detector as a solution to the problem with 1000/6 gasoline, 100% methanol, 100%ethanol or <br /> of leakage in the pressurized piping between the petro- any combination of these, 100%diesel and MTBE con- <br /> leum product storage tanks and the dispensers. In 1976, tent up to 15%.Wear surfaces on the metering pin and <br /> responding to industry demand, the '2 second" Dia- poppet are now plated. <br /> phragm leak detector(DLD) was introduced. This leak The XLD can be easily mounted in the current leak <br /> detector was the first to complete a line test in approxi- detector opening on the Red Jacket 4" submersible <br /> mately two seconds. pump. The XLD can also be adapted for use on older or <br /> Years of research and field experience have enabled competitive model pumps with the use of the Red Jacket <br /> Red Jacket to further enhance the reliability of this leak detector housing. <br /> product. Continuing to advance technology in mechanical line <br /> The XLD, Extended Life Diaphragm Leak Detector,is leak detection, <br /> constructed in design and materials to appreciably ex- <br /> tend the time that it maintainsthe required leak detecting Nc j0Cj!y=_; <br /> L <br /> DESIGNED TO HANDLE Can be installed on competitive model submersible <br /> 100016 GASOLINE pumps with the use of the Red Jacket leak detector <br /> 100016 METHANOL housing. <br /> 100%ETHANOL <br /> ANY COMBINATION OF ABOVE Can be installed in any position. <br /> 100% DIESEL Not sensitive to vibration. <br /> UP TO 15%MTBE <br /> Restricted flow rate of approximately 3GPM down Rugged cast iron construction. <br /> stream of the leak detector provides an easily UL Listed with approved housing. <br /> distinguishable signal that complies with EPA <br /> requirements. EPA 3rd party certified. <br /> Easily installed in current leak detector opening Designed for use with 1/3, 3/4 and 1-1/2 horsepower <br /> on the Red Jacket Submersible pump. pumps with flows up to 70GPM. <br /> *Certain installation and operating conditions(i.e.,thermal contraction,unused stubs in discharge line,static head,etc.) <br /> can adversely affect the performance of mechanical leak detectors. Please refer to the Red Jacket Mechanical Leak <br /> Detector Manual#5191. <br /> For additional information, contact the Petroleum Division at 1-800-2-MARLEY(262-7539). <br />