REMOVAL_1988 - Laserfiche WebLink

Home Browse Search

itandard Agreement - Continuation Sheet SA No. 3179 Tom's Breaking and Hauling, Inc. W.O. No. GST 697 May 5, 1987 Page 2 of 3 6. The Contractor shall provide the State with an approved copy of the tank removal application as submitted to the local jurisdiction. 7. The Contractor shall also provide the State with a receipt from the firm receiving the tank verifying that the tank has reached its destination in compliance with the tank removal application. 8. a. Contractor shall remove, transport and dispose of the underground tank in accordance with all federal, state and local regulations applicable to this project. b. The Contractor shall coordinate all its work with the field representative, Bob Krump (209) 835-4141 (Ext. 4240) and the Project Manager, Hassan Pejuhesh (916) 322-8994. c. Contractor shall notify the appropriate local agency at least 48 hours prior to initiating any work at this facility. d. The Contractor shall comply with all security and other pertinent regulations enforced at the facility. e. Contractor shall obtain plans of the existing underground storage tank if available from the field representative and make open excavations as required to remove the underground storage tank. f. Contractor shall verify all existing utility services in the immediate area prior to the work, and shall be responsible for any damages to these services. g. Contractor shall sawcut, excavate, remove, and dispose offsite the pavement and/or concrete situated above the underground tank prior to the excavation to remove the underground tank. This requirement may be waived by the project manager depending on the conditions of the existing surface. h. The Contractor shall provide a safety plan when the excavation is over 5 feet, 0 inches deep. i. All work, including equipment, materials and installation shall conform to California Administrative Code, Title 24, Building Standards (CAC Title 24) and to California Administrative Code, Title 8, Chapter 4, Division of Industrial Safety (DIS). j. The Contractor shall backfill the tank cavity to 90 percent compaction.