Laserfiche WebLink
E) TESTING YOUR F-SERIES INSTALLATION <br /> THE F-SERIES FIBERGLASS PENETRATION FITTINGS MAY ONLY BE <br /> INSTALLED AND TESTS BY A BRAVO CERTIFIED CONTRACTOR <br /> Details can be found at vwwv.sbravo.com/cert, <br /> EA) After all the F-Series Fiberglass Fittings on one Sump are installed and fully cured: <br /> For DoubleWall: test the Sump interstice using a pressure/soap method. <br /> BRAVO SYSTEMS DOUBLEWALL F-SERIES FITTINGS ARE <br /> WARRANTED ON OTHER MANUFACTURERS <br /> DOUBLEWALL SUMPS ONLY IF INSTALLED BY A B I RAVO <br /> CERTIFIED INSTALLER <br /> CHECK WITH YOUR DOUBLEWALL SUMP MANUFACTURER <br /> FOR DIRECTIONS ON HOW TO TEST THE INTERSTICE. <br /> 4 <br /> E.2) For Bravo Systems DoubleWall Sumps, the maximum test pressure for the interstice is 4 PSI. <br /> Pressure your interstice using ONLY the Factory-Installed Combination Gauge * and soap, down <br /> all the F-Series penetration fittings and/or any previous repairs made to the Sump. If any leaks are <br /> found on or around the F-Series fittings, Call Bravo Systems Technical Support for special <br /> directions. DO NOT ATTEMPT TO FIX OR SEAL LEAKS ON THE FITTING YOURSELF! <br /> r * If the site plans tell you to REMOVE THE FACTORY-INSTALLED <br /> EMNZGAUGES, you must NOT remove these components, and call <br /> Bravo Systems Tech Support so they can resolve this issue with the firm that drew the plans. <br /> REMOVING THE FACTORY-INSTALLED CONNECTIONS VOIDS THE PRODUCT WARRANTY! <br /> If you have any problems with Bravo Systems components, DoubleWall <br /> Containment Systems, or accessories, Call Bravo Systems Immediately: <br /> 1-800-28-BRAVO 1-323-888-4133 info@sbravo.com <br /> 11 ii-F-Series-1 X-SS-D-11 A <br />