Laserfiche WebLink
Juing Altet'native to Recommendation <br /> C.1) Your primary pipe, secondary pipe, and Bravo FRP rigid penetration fittings should be clean_ <br /> and COMPLETELY DRY AT ALL TIMES. All pre-abraded or milled areas should be inspected for <br /> debris and inconsistencies. No dirt, grit, water or other foreign material should be on or inside the <br /> fiberglass fitting components. <br /> I <br /> USE SMITH TM ADHESIVEION SMITH TM PIPE or <br /> AMERONTM ADHESIVE ON AMERONTM PIPE ONLY <br /> C.2) Please follow your pipe manufacturers' installation guidelines on cleaning, cutting, scarfing, <br /> tapering and gluing your fiberglass pipe. Clean all parts after scarfing and tapering. <br /> C.3) Get one clamping tool ready for each fitting installation. <br /> CA) Follow your adhesive manufacturer Adhesive <br /> Instructions to mix and apply your adhe- Fig. C5 <br /> sive. One bag of provided fiberglass filler is to <br /> be fully mixed with each adhesive kit. (Pg. 3) <br /> Awl- <br /> DO NOT ATTEMPT TO MIX MORE <br /> THAN ONE KIT AT A TIME. <br /> C.5) Main body first - carefully apply a <br /> generous amount of adhesive to the wall and <br /> the face that will meet the wall (Fig. C5). <br /> DO NOT ALLOW ADHESIVE TO <br /> FILL THE CHANNEL OR TEST <br /> PORT AREA <br /> OUTSIDE <br /> ONLY <br /> ----- -- ------ ---- - /� L <br /> / Carefully apply mixed i <br /> ij adhesive to the flange r �� <br /> 9 ii-F-Series-TS-D-13A <br />