Laserfiche WebLink
D. Fires may occur from sources of ignition. <br /> a) "Hot Work' procedures for all welding, cutting, and soldering operations: <br /> 1. All reasonably movable combustible materials should be removed from <br /> the Hot Work area and floors swept clean. Wood floors should <br /> preferably be covered by metal or wet down. <br /> 2. A fire extinguisher having a minimum rating of 2 A, 10 BC should be <br /> maintained nearby. <br /> 3. A fire watch should be maintained for at least 30 minutes after Hot <br /> Work operations are completed. <br /> E. If Contamination exposure is encountered on this project, activities will cease <br /> and proper notifications and procedures will be followed. <br /> I;, EXCLUDED WORK ZONE <br /> The boundary of the site shall be an excluded work zone. Personnel not actively involved in site <br /> work activities (other than inspectors from concerned regulatory agencies) shall not be allowed <br /> within the excluded work zone. <br /> 7. HAZARD COMMUNICATION <br /> All personnel are to be familiar with this Site Work Health and Safety Plan. <br /> Field supervisor will telephone for emergency service and notify office when needed. <br /> 5 <br />