Laserfiche WebLink
6. SECONDARY PIPE TESTING <br /> Test Method Developed By: ❑ Piping Manufacturer ® Industry Standard ❑ Professional Engineer <br /> ❑ Other(Spec) <br /> Test Method Used: M Pressure ❑ Vacuum ❑ Hydrostatic <br /> ❑ Other(Spec) <br /> Test Equipment Used: Test reducer boots,Nitrogen and gauges Equipment Resolution:0.5% of span <br /> Piping Run#91 <br /> Piping Material: Fiberglass <br /> Piping Manufacturer: SMITH <br /> Piping Diameter: 3" <br /> Length of Piping Run: 165 ft. <br /> Product Stored: Gasoline <br /> Method and location of Reducer Boots/Fittings <br /> pipm -run isolation: <br /> Wait time between applying <br /> pressure/vacuum/water and 10 minutes <br /> starting test: <br /> Test Start Time: 9:15am <br /> Initial Reading(RI): 5 psi <br /> Test End Time: 10:15am <br /> Final Reading(RF): 5 psi <br /> Test Duration: I hr. <br /> Change in Reading(RF-RI): none <br /> Pass/Fail Threshold or No detectable Loss <br /> Criteria: <br /> Test Result: X Pass 0 Fail <br /> Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />