Laserfiche WebLink
0 <br />IJ <br />y a we y1�pnHsmr t1uinp PlumbfHg tdrinecildns <br />Dispvnscr Sump Plumbing <br />The plumbing connections required inside dispenser sumps can be simple or <br />ronmdlrnlnd deponding upon the plumbing requirements, dispenser size and <br />Alpo mdry locations. Pipe entries which are located off the center line may <br />rrgnim Its. use of the flax connectors as riser pipes Instead of the standard <br />uqul sinal risco Piens. For some dispenser models, the pipe entries are local - <br />rd •:u corse, In file wall of the dl mensm that Product Of/sets are required, <br />Rigid Riser Pipes <br />Rigid steel riser pipes should be used when pipe entries are located on or <br />slightly off the center-Ilne of the dispenser. Tee and/or elbow fillings should be <br />used In conjunction with these steel riser pipes. <br />Flexible Riser Pipes <br />Flexible connoclors shoultl be used when pipe entries are located slgnilicanlly <br />all the colter -flue, of the dispenser. <br />Securing Shear Valves <br />Adjustable valve mounting plates <br />me available lot securing boss type <br />shear valves. <br />Product Off Sets <br />Some dispenser models have pipe entries located very close to the side wall of <br />the dispenser. This condition may require the use of the Product Offset filling <br />to connect the dispenser to a shear valve or a check valve. <br />Securing Check Valves <br />3" Strut Clamps should be used to <br />secure check valves to the stabilizer <br />bars. <br />Securing Riser Pipes <br />1-1/2" Strut Clamps should -be used <br />to secure rigid auxiliary pipes to the <br />stabilizer bars. <br />Securing Sensors <br />2" Stall Clamps Should be used to <br />secure leak detection sensor tubes <br />to the stabilizer bars. <br />