Laserfiche WebLink
�Wo *00 <br /> S WRCB,January 2002 Page I of 1 <br /> 6. PIPING SUMP TESTING <br /> Test Method Developed By: r Tank Manufacturer F Industry StandardProfessional Engineer <br /> r Other(Specify) <br /> Test Method Used By: r Pressure F Vacuum Hydrostatic <br /> F Other(Specify) <br /> Test Equipment Used: VPLT Equipment Resolution: 0.00001 in. <br /> STP Containment for <br /> Tank waste oil near <br /> rack WASTE OIL-1 <br /> Sump Diameter/Dimensions: 48 in. in. in, in <br /> Sump Depth: 56.00 in. in. in. in. <br /> Sump Material: Fiberglass <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: 18'00 <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: 22'00 <br /> Condition of sump prior to testing: good <br /> Portion of Sump Testedl 20 <br /> Does turbine shut down when <br /> sump sensor detects liquid(both r Yes r No o NA r Yes r Nor NA r Yes r No 0 NA C Yes r Nor NA <br /> product and water)?* <br /> Turbine shutdown response time 00:00:00 sec sec sec see <br /> Is system programmed for fail-safe r Yes r No Rr NA r Yes r Nor NA r Yes r Nor NA r Yes C Nor NA <br /> shutdown?* <br /> Was fail-safe verified to be <br /> operational?* r yes r No IT NA r Yes r No ft" NA r Yes r Nor NA r Yes C, No C NA <br /> Wait time between applying <br /> pressure/vacuum/water and starting 5 min min min mm <br /> test <br /> Test Start Time: 13:21:00 <br /> Initial Reading(Rl): 0.00000 in. <br /> Test End Time: 13:51:00 <br /> Final Reading(RF)-' -0.00110 in. <br /> Test Duration: 30 min <br /> Change in Reading(RF-RI): -0.00110 in. <br /> Pass/Fail Threshold or Criteria: +/-0.00200 <br /> Test Result: Pass <br /> Was sensor removed for testing? r Yes r No r NA r Yes r No NA r Yes r No r NA r Yes r No r NA <br /> Was sensor properly replaced and (P Yes C No r NA r Yes O' Nog NA C Yes r No r NA d3' Yes 6 No r NA <br /> verified functional after testing? <br /> Comments-(include information on repairs made prior to testing, and recommended follow-up for foiled tests) <br /> If the entire depth of the sump is not tested,specify how much was tested.if the answer to any of the questions indicated with an <br /> asterisk(•)is"NO"or"NA",the entire sump must be tested. <br /> WO:2315605 <br />