COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

Section 1. INTRODUCTION The ER-1200 is a permanentely installed system that continuously monitors vapors aspirated from the underground areas immediately surrounding the product storage tanks. The system is highly capable of sensing indications of leaking gasoline, diesel fuel, and other types of hydrocarbon based materials. When abnormally high hydrocarbon vapors are sensed, the ER-1200 will set off visual and audible alarms. A reset button-is provided so that the user can silence the audible alarm, but the visual alarm can only be cleared by authorized service personnel. The panel is equiped with a printer which records on tape the vapor levels, line pressure, and other conditions consequential to the proper and continual operation and manitenance of the system. This permanent record includes alarm conditions, power interruptions and even the opening and closing of the panel door. In the event of an alarm condition, the printer will tell the user exactly what has caused the condition, and direct your response accordingly. In the absence of an actual alarm, the ER--1200 will run contin- uously without need for supervision or attention. It is perhaps the simplest and most fool proof method of bringing the customer into compliance with leak detection requirements. System Specifications Size: 14" x 16" x 8 5/8" Weight 52 lbs. Mounting: Permanent Wall Mount Power: 111/120 VAC Sensor: Bulk Semiconductor vapor sensor Output Formats: 0 - 225 RAW Scalar 00-ff RAW Hex Scalar 0.00 to 1.5% Calculated concentration. Sensing Lines: `v" I.D. Polyethylene. Operating Instructions Once the ER-1200 is installed and adjusted by the factory technicians, there is no need for any attention to the system unless an alarm condition exists. All functions are automatically performed.