Laserfiche WebLink
installing Combo & Petro Cables Nylon Cord ad;al <br /> Cable <br /> Radial Cables—At the monitoring fitting of the -cap <br /> tank attach one end of the nylon cord to the small <br /> male plug of the Radial Cable. Carefully pull the p <br /> cable into and around the tank's interstitial <br /> space. Once the loop has been completed con- <br /> nect the Radial Cable to the Connector Cable or ! <br /> the Monitor Cable and carefully push the excess <br /> cable into the cross fitting, then screw on the Conduit-,� <br /> cap. (Illustration 5 & 7) <br /> 41 <br /> li <br /> 11 <br /> u Cross Fitting <br /> u <br /> d <br /> Tank <br /> Male Plug End <br /> t <br /> nylon Card <br /> Illustration 5 <br /> Vertical Cables—Lower the Vertical Cable straight down into the monitoring station until it reaches <br /> the bottom. Connect the Vertical Cable to the Connector or Monitor Cables. Carefully push excess <br /> cable into the cross fitting, then screw on the cap. (Illustration 6 & 7) <br /> Condu,t. Conduit <br /> Crass rifting Cap . <br /> r� <br /> Vertical Combo Cable <br /> steel Rouble 'fall Tank �j I' <br /> Jacketed Steel Tank <br /> Connector or + <br /> .`1 coni for CabSc <br /> Conduit <br /> Connector Cable ` <br /> Cross Fitting <br /> Combo or Petro Cable <br /> Illustration 6 Illustration 7 <br /> —11— <br />