Laserfiche WebLink
n <br /> LL ' L <br /> Vis.�� � � v � <br /> to ZQ(, <br /> 138000/69000 DoubleWall Dispenser Containment <br /> VI^GNM`=°J lf.1_ �-I-ALTH <br /> -P1.,, <br /> F - ADJUSTING THE PRODUCT SHEAR VALVIt <br /> UNION <br /> xX <br /> Qr w` <br /> y�� a <br /> J < � <br /> QOM v <br /> t <br /> ��5� Boss mount bolts <br /> WIDTHWISE ADJUSTMENT: +/- 3/8" <br /> 3/8" Bolts <br /> U-Bolt Bracket Not Shown <br /> F.1 - When the dispenser is anchored properly, the dispenser inlet or pump inlet should be plumb <br /> with the product shear valve. if the product shear valves are positioned correctly, connect them with <br /> a union. <br /> F.2 - If the valve and inlet are not aligned, determine the distance necessary for the valve to be <br /> moved. To adjust the valve lengthwise and/or widthwise, loosen the 3/8" bolts on the bracket ends <br /> and on the bracket inserts. Align valve to dispenser inlet and retighten bolts. <br /> F.3 - Connect dispenser riser pipe to the product shear valve. A nipple may be required to extend <br /> the dispenser riser. <br /> For rigid piping apply a UL classified pipe sealant for use and handling <br /> Emmamoof gasoline and petroleum oils to externally threaded connections. <br /> F.4 - Now retighten bolts and/or nuts attaching the shear valves to the bracket. Use provided wash- <br /> ers. <br /> F.5 - Connect electrical and vapor lines to the dispenser as required by local regulations. <br /> Always follow electrical and vapor component manufacturers' Installation Instructions. <br /> 13 ii-B8000-9000-DW-11B <br />