COMPLIANCE INFO 2002 - 2013 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 d/ 00/ Page_of_ 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard X Professional Engineer ❑Other(Spec6) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Spec) Test Equipment Used: Caldwell Systems Equipment Resolution: .005/30 min Sump#1 Sump#2 Sump# Sump# Sump Diameter: 42" 42" Sump Depth: 33" 33" Sump Material: Poly Poly Height from Tank Top to Top of Highest Piping Penetration: 14" 14" Height from Tank Top to Lowest 10" 10" Electrical Penet ation: Condition of sump prior to testing: Dry Dry Portion of Sump Tested' 2"above highest Piping Penetration Does turbine shut down when sump sensor detects liquid(both xYes ❑No ❑NA xYes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)? ater)?� Turbine shutdown response time Is system programmed for fail-safe shutdown? xYes ❑No ❑NA xYes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Was fail-safe verified to be operational?* p Yes xNo ❑NA ❑Yes xNo ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Wait time between applying pressure/vacuum/water and starting 5 min 5 min 5 min 5 min test: Test Start Time: 11:40 11:51 Initial Reading(R,): .00" .00" .00" .00" Test End Time: 12:10 12:21 Final Reading(RF): .00 .00 Test Duration: 30 min 30 min 30 min 30 min Change in Reading(RF-R,): .00 .00 Pass/Fail Threshold or Criteria: .005/30 min .005/30 min .005/30 min .005/30 min Test Result. x Pass ❑Fail x Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? xYes ❑No ❑NA xYes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No DNA— Was NAWas sensor properly replaced and xYes ❑No ❑NA xYes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testing? Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)