REMOVAL_2003 - Laserfiche WebLink

Home Browse Search

Spec No. CGT-TRACY-UST-01-2003 General Requirements 01010-13 1. General: Remove paper labels from glass, fixtures, and equipment only after respective items have been inspected, verified, and approved to assure that each complies with requirements of Specifications and Drawings. Labels and plates that are permanently attached to equipment shall not be removed. Remove paint and clean all permanent labels so that they are legible. 2. Premises and Site: Remove all trash, debris, and surplus excavation dirt. No items shall be left or discarded elsewhere on the work site. Items that shall be discarded shall be removed to authorized public dumps. Leave premises "broom clean." Extra building materials, supplies, etc., shall be provided for PG&E's use, where specified in the separate sections of the Specification. 3. Finished Surfaces: Remove marks, stains, fingerprints, and dirt. C. Close-Out Punch List: 1. Toward the completion of the Work, PG&E will begin the routine inspection of the facility and prepare a punch list of deficiencies or corrections required. 2. One (1) copy of each punch list for a specific room or area requiring corrections will be forwarded to the Contractor, and a copy will be retained by PG&E. 3. Contractor shall correct all deficiencies expeditiously and shall note all corrections and the date performed upon the punch list. D. Project Closeout Submittals: Prior to final payment and before PG&E issues a Final Certificate for Payment, Contractor shall furnish to PG&E the following: 1. Geologist's UST Closure Report 2. Copies of all agency-issued permits and inspection reports. 3. Copies of all analytical reports. 4. Copies of all transportation and disposal documents. 5. Release or Waiver of Liens as required by General Conditions. E. Record Documents: 1. In addition to any other drawing sets, Contractor shall keep on the job one(1) set of the Specification and prints of the Drawings for the purpose hereinafter described. Contractor shall note on this set of records exact sizes, locations, and elevations of all buried or concealed pipe, conduit, ductwork, and equipment and the locations of services, panels, disconnects, and shutoffs that are altered by the work. Record underground utility locations with dimensions from building corners or established reference points. The surveyor shall verify all grading changes and utility locations. The Drawings shall be kept up to date daily during the course of construction and shall be available at all times, upon request, for inspection by PG&E. 2. Upon completion of the Work, PG&E will provide Contractor a set of drawings, and all changes as noted on the record set of prints shall be incorporated thereon by Contractor. All changes shall be neatly and legibly drawn to scale on the set of drawings using standard architectural or engineering drafting practices. The Contractor shall deliver the set of drawings to PG&E.