COMPLIANCE INFO 2004 - 2007 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 6. Piping Sump Testing Page 4 of 5 Test Method Developed By. O Piping Manufacturer OO Industry Standard O Professional Engineer O Other (Specify) Test Method Used. O Pressure O Vacuum .O Hydrostatic O Other (Specify) Test Equipment Used: INCON jEcuipment Resolution: +/_ 0.002 Inches Sump# TCY1 Sump# TCY7 Sump# TCY2 Sump# Sump Diameter: 42" 42" Sump Depth 51" 42" Sump Material: Fiberglass Fiberglass eight from Tank Top to Top of Highest Piping Penetration: 30" 20 Height from Tank Top to Lowest lectrical Penetration: 31" 10 ondition of sump prior to testing: Clean and dry Clean and dry ortion of Sump Tested' 2" Above Highest 2" Above Highest Does turbine shut down when ump sensor detects liquid both product and water)?' ❑ Yes ❑ ND NM ❑ Yrs ❑ No N NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ ND ❑ NA Turbine shutdown response time. N/A N/A Is system programmed for fail-safe hutdown?' ❑ Yes ❑ No N NA ❑ Yes ❑ No N NA ❑ Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA as fail-safe verified to be operational?* ❑ Yes ❑ No N NA ❑ Yes ❑ No N NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ ND ❑ NA Wad time between applying pressure/vacuum/water and farting test. 10 min. 10 min. Test Start Time: 15:21 /15:51 18:04 /18:20 Initial Reading (R,) 3.6442 / 3.6222 2.3479 / 2.3480 est End Time: 15:36 /16:06 18:20 /18:35 nal Reading (R,) 3.6395 / 3.6187 2.3480 / 2.3482 est Duration: 15 min. / 15 min. 15 min. 115 min. hange in Reading (R, -R,) 0.0047 / 0.0035 -0.0001 1-0.0002 NOT TESTED ass/Fail Threshold or Criteria: +1-0.002" +1-0.002" est Result: N Pass ❑ Fail N Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? N Yes ❑ No ❑ NA N Yes ❑ No ❑ NA ❑ Yes ❑ No N NA ❑ Yrs ❑ No ❑ NA as sensor properly replaced and erified functional after testing? N Yes ❑ No ❑ NA N Yes ❑ No ❑ NA ❑ Yes ❑ No NM ❑ Yes ❑ ND ❑ NA Comments - (include information on repairs made prior to testing, and recommended follow-up failed tests) TIC.112..waste-od.was..not.tested-d.ue..to..damaged.to.sk..k o.o.tat.iecandary...Product ..... Needs to be repaired so the sump and secondary line can be tested.. ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (•) is'NO" or "NA', the entire sump must be tested. (See SWRCB LD -160)