COMPLIANCE INFO 2004 - 2007 - Laserfiche WebLink

Home Browse Search

SWRCB. January 2002 < nrnilv/` CiT11dD 'i'riCTTNf_ *Md Page _ of Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard X Professional Engineer ❑ Other (Specify) Test Method Used: ❑ Pressure ❑ Vacuum X Hydrostatic ❑ Other (Specify) Test Equipment Used: LAKE TEST SOAP SLOP Equipment Resolution: . SLOP Sump Diameter. 42" 42" 42" Sump Depth: 48" 48" 120" Sump Material: FHiERGLASS FIBERGLASS FIBERGLASS Height from Tank Top to Top of Highest Piping Penetration: 16" 14" 24" Height from Tank Top to Lowest Electrical Penetration: 22" 24" 58" Condition of sump prior to testing: GOOD GOOD GOOD Portion of Sump Tested' 24" 26" 60" Does turbine shut down when sump sensor detects liquid (both product and «ester)' Yes ❑ No X NA Yes ❑ No XNA Yes ❑ No X NA ❑ Yes ❑ Nor NA Turbine shutdown response tithe Is system programmed for fail-safe shutdrnvn? Yes ❑ No X NA Yes ❑ No X NA Yes ❑ No XNA ❑ Yes ❑ No ❑ NA Was fail-safe verified to be operational?* Yes ❑ No X NA Yes []No XNA Yes ❑ No X NA ❑ Yes ❑ No ❑ NA Wait time between applying pressue/vawum/water and starting test: 30 MIN 30 MIN 30 MIN Test Start Time: 1:30 1:30 1:30 Initial Reading (Pr): 24" 26" 60" Test End Time: 1:30 1:30 1:30 Final Reading (Re): 24" 10" 10" Test Duration: 24 HR 24 HR 24 HR Change in Reading (RF-Ril: 0 16" 50" Pass/Fail Threshold or Criteria: 0 0 0 Test Result: X Pass Fail Pass .l' Fail Pass X Fail ❑ Pass ❑ Fail Was sensor removed for testing? X Yes ❑ No ❑ NA X Yes ElNo ❑ NA X Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing" X Yes ❑ No [INA X Yes ❑ No ❑ NA X Yes ❑No ❑ NA ❑Yes ❑ No ❑ NA ` Comments (include information on repairs made prior to testing and recommended follow-up for failed tests) SLOP I TANK IS A COLLAR FAILURE, SLOP 2 TANK SECONDARY PIPING HAS BEEN CUT INSIDE SUMP AND NEW PIPING PENATRATIONS ARE NEEDED,ALSO RE -FIBERGLASS OF COLLAR.MAY NEED TO EXCAVATE TO FIX PENATRATION ' if the entire depth of the sump is not tested, specify how much was tested If the answer to any of the questions indicated with an asterisk(*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)