COMPLIANCE INFO 2004 - 2007 - Laserfiche WebLink

Home Browse Search

*Revised 12-5-07 for Yell( 1535 E. Pescadero Way, Tracy, Ca t The Facility (6 of the 7 tanks) are currently being monitored by a Veeder Toot TLS 250 system. The Soap tank shall remain as is, connected to a separate TLS 250, alone; there are no provisions within this scope to make any changes to the Soap tank at this facility. Although the current system monitoring the 6 tanks is functional, the newer TLS 350 should provided additional leak detection protection as well as easier annual certifications, and increased alarm history reporting. The intent of this scope is to delineate the exact changes to take place at this facility. Z The existing Veeder Root TTS 250 shall be properly locked out/tagged out and removed by factory trained technicians. Only current ICC trained personnel and those individuals possessing the required Veeder Root Mamrfacturer training shall he allowed to anrk on this project. These credentials shall he mwbhk andprerented to an inspector mpon requert. 2. A Veeder Root TTS 350 unit shall then be installed in the same general location. The existing sensor wiring shall be visually inspected and then re connected to the TLS 350. 3. The existing power conduit and wiring shall be routed into the cabinet of the Veeder Root TIS 350. Verification of the correct wiring and breaker size shall be determined and corrected if needed. Field Change/ 4. One additional sensor required replacement during field activities at the site. A Addendum Veeder Root Dual Float Hydrostatic Annular space sensor (Veeder Root Sensor Model # 303) was installed on Tank # 2, Waste Oil Tank (Northern most tank in the open field). 5. Each of the existing sensors shall be inverted and tested for operation. 6. Each of the existing ATG's (Automatic Tank Gauges) shall be removed and inspected, then re programmed for each respective product, and verified for accuracy. 7. The existing Overfill Alarms shall be re connected and also checked for accuracy.