Laserfiche WebLink
• • III <br /> Bobcat Central, Inc. <br /> FUEL TANK <br /> ROUTINE MONITORING PROCEDURE <br /> Evergreen Environmental Services, 6880 Smith Avenue, <br /> Newark, CA 94560, 800-972-5284 shall be contacted to <br /> clean up and contain any leakage or spill as required. <br /> The LS300-120 PLUS requires little maintenance because the <br /> system does not contain any wearing mechanical components <br /> but as with any system it is important to make periodic <br /> check s on its performance. <br /> Checks on the LS300-120 PLUS performance will be made at no <br /> more than 30 day intervals. Along with the performance test <br /> the transducer and its associated wiring and piping will b <br /> visually inspected. The following procedure will be per <br /> formed in sequence to properly check the system performance <br /> a) Depress and the release the Test/Reset button, <br /> this will initiate the system self test. <br /> b) Observe the HI and test lamps come on. <br /> c) Observe that both the LO Lamp and TEST lamp come <br /> on after 1 second and the HI lamps goes off. <br /> d) Observe that after 10 seconds the Test lamp goes <br /> off and then the Alarm lamp and Alarm horn come on <br /> for one second. <br /> e) Observe that both the HI and LO lamps return to <br /> their original state prior to the test. <br /> f) Turn on the submersible pump and observe that the <br /> HI lamp comes on. <br /> g) Turn off the submersible pump and observe the HI <br /> lamp goes immediately off. <br /> h) Remove dispenser front cover and visually inspect <br /> transducer, wiring and associated piping. <br /> 10/93 2 <br />