COMPLIANCE INFO_JUN 2016 - 2018 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page 5 of_7_ 7. UNDER-DISPENSER CONTAINMENT C TESTING Test Method Developed By: ❑UDC Manufacturer ® Industry Standard ❑Professional Engineer ❑ Other(Specify) Test Method Used: ❑ Pressure ❑Vacuum E Hydrostatic ❑ Other(Spec) Test Equipment Used: INCON SUMP TESTER Equipment Resolution: 0.002" 00000� UDC#1-2 UDC#3-4 UDC# UDC# UDC Manufacturer: Bravo Pan Bravo Pan UDC Material: Steel Steel UDC Depth: 12" 12" Height from UDC Bottom to Top 2 5" 2.5" of Highest Piping Penetration: Height from UDC Bottom to NIA N/A Lowest Electrical Penetration: Condition of UDC prior to Dry Dry ENVIRONMENTAL HEALTH testing: n Portion of UDC Tested 2"/Penetrations 2"/Penetrations F' " ?A ENT Does turbine shut down when UDC sensor detects liquid(both ❑Yes LINO ®NA Elves ❑No ®NA []Yes ❑No ❑NA ❑Yes []No [INA product and water)?* Turbine shutdown response time N/A NIA Is system programmed for fail- safeshutdown? ❑Yes [--]No ❑NA [:]Yes []No ®NA ❑Yes ❑No ❑NA []Yes ❑No ❑NA Was fail-safe verified to be []Yes ❑No [INA ❑Yes operational? ❑No ®NA ❑Yes []No ❑NA ❑Yes ❑No ❑NA Wait time between applying pressure/vacuum/water and 10 min. 10 min. starting test Test Start Time: 11:05am 11:05am Initial Reading(R): 2.8635" 2.0797" Test End Time: 11:20am 11:20am Final Reading(Rr): 2.8628" 2.0801" Test Duration: 15 min. 10 min. Change in Reading(RF-Rj): -0.0007" +0.0004" Pass/Fail Threshold or Criteria: +/.0.002" +/-0.002" +/-0.002" +/-0.002" Test Result: ®Pass ❑Fail ®Pass ❑ Fail ❑ Pass ❑Fail ❑Pass ❑ Fail Was sensor removed for testing? ❑Yes ❑No ®NA Elves ❑No ®NA ❑Yes ❑No ❑NA Elves [ No ENA Was sensor properly replaced and verified functional after testing? Elves ❑No ®NA Elves []No ®NA ❑Yes []No ❑NA ❑Yes ❑No ❑NA Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) 1. All UDCs have chain and floats installed for primary leak detection.Verified proper functionality testing per manufacture guidelines and product shut-off @ shear valve when in leak position. ' If the entire depth of the UDC is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160)