Laserfiche WebLink
FROM OIL EQUIPMENT PHONE NO. : 209 7545726 Nov, 212001 10,33AM P3 <br /> WESTERN FIBERGLASS, INC. 1-800-688-3375 <br /> POLYCONTM DISPENSER MOUNTING ASSEMBLY (DMA r-) <br /> Summary <br /> The PolyCon Dispenser Mounting Assembly shall be installed in conjunction with the product dispenser <br /> and in accordance with the manufacturer's installation instructions.The Dispenser Mounting Assembly, <br /> shall contain environmentally hazardous fluids that might leak from any piping terminations,fittings,and <br /> flex-hoses contained within the Dispenser Mounting Assembly,shall insure,using U.L.Listed frames for <br /> both the dispenser base and safety valve assembly,that safety valve poppet activation occurs in the event <br /> of dispenser knock-down <br /> System Specifications <br /> 1.01 System Suitability <br /> The Dispenser Mounting/Containment System shall: <br /> A. Provide secure,independent,mounting assemblies for the dispenser base and U.L.Listed <br /> shear valve mounting frame that are anchored in concrete for transfer of stress and loading, <br /> such that shearing action occurs at the shear valve upon dispenser impact without damage to <br /> the mounting framework. <br /> B. Provide a mans to prevent surface,ground,run-off or wash-down water from entering the • <br /> containment system. <br /> C. Contain any release of environmental contaminants from the dispenser and/or fittings <br /> contained within the Dispenser Mounting System. <br /> D. Provide full access to all piping termination's,fittings and hoses contained within the <br /> Dibvenscr Mounting System. <br /> E. Accommodate an explosion/flame suppressant barrier to prevent flash fire. <br /> 1.02 Construction Specifications: <br /> A. Be constructed of poly-camposite material. <br /> B, Be constructed of materials that are not harmful to the environment. <br /> C. Be suitable for petroleum products and blends including methanol and ethyl alcohol <br /> mixtures. <br /> D. Have a thirty(30)year warranty against corrosion. <br /> 1.03 Release Monitoring shall: <br /> A. Allow fail visual inspection of all piping reductions,fittings and hoses. <br /> 1.04 Piping Penetrations shall: <br /> A. Provide locations for the installations of fluid tight pipe and conduit penetrations seals to be <br /> installed according to the manufacturer's instructions. <br /> MOMCEAVD WORD/BA`DERIPOLYDMASPEGIAN99 <br />