Laserfiche WebLink
FROM ; OIL FJIIII'III III PHONE NO, : 209 7545726 Nov, 21 2001 10:34RM P4 <br /> WESTERN FIBERGLASS, INC. 1-800-688-3375 <br /> DISPENSER DRIP BOX (DDB) <br /> Summary <br /> The Dispenser Drip Box shall be attached to the dispenser shear/safety valve box,installed in conjunction <br /> with the product dispenser and in accordancewith the manufacturer's installation instructions.The <br /> Dispenser Drip Box shall contain environmentally hazardous fluids that might leak from arty piping <br /> terminations,fittings,or flex hoses contained within the Dispenser Drip Box and shall be manufactured <br /> by Western Fiberglass,Inc. <br /> System Specifications <br /> 1.01 System Suitability <br /> The Dispenser Drip Box shall: <br /> A. Attach to the dispense'shear/safety valve mounting framework and be sealed around such <br /> framework as to prevent the intrusion of ground water into the drip box. <br /> B. Be of sufficient size to allow all piping termination's.fittings.and flex-hoses to be contained <br /> within the drip box and to provide full access to all fittings contained within the Dispenser <br /> Drip Box, <br /> C. Contain any release of environmental contaminants from the dispenser and/or fitting . <br /> contained within the Dispenser Drip Box. <br /> D. Accommodate an explosion/flame suppressant barrier to prevent flash fire. <br /> 1.02 Construction Specifications <br /> Fiberglass Fluid Handlin,+�T ents shall <br /> A. Meet or exceed United States Bureau of Standards PS-15-69 for Custom Contact Molded <br /> Reinforced-Polyester Chemical Resistant Process Equipment. <br /> B. Be non-permeable to hydrocarbons and not weakened by exposure to such materials. <br /> C. Be constructed of materials that are not harmful to the environment. <br /> D. Be suitable for petroleum products and blends including methanol and ethyl alcohol <br /> mixtures. <br /> E. Have a thirty(30)year warranty against corrosion. <br /> 1.03 Release Monitoring shall: <br /> A. Allow full visual inspection of all piping reductions,fittings,and hoses. <br /> B. Provide a monitor point for electronic monitoring and evacuation of fluids. <br /> C. <br /> 1.4 Piping Penetrations shall: <br /> A. Provide locations for the installation of fluid tight pipe and conduit penetration seals to be <br /> installed in accordance with mamdacturer's inspections. <br />