Laserfiche WebLink
r • • <br /> � <br /> BEAUDREAU MODEL 406 <br /> 1 " PUMP CUT-OFF <br /> BEAUDREAU ELECTRONICS INC. <br /> r <br /> BEAflEAU ELECTRIC!HC- <br /> UI) <br /> BF iECi. <br /> MODFF 60191AiC19F6 CONT00lLFP �. <br /> i <br /> 1 Description: <br /> • The Model 406 Pump Cut-Off is a solid state two-part modular system that was specifically <br /> designed for use in containment pans/sumps for dispensers and turbines.The system <br /> functions as a passive device for monitoring an accumulation of fuel spills and/or filter <br /> leaks.When this accumulation reaches a user specified level, the dispenser or turbine is <br /> shut down until the sensor is reset. <br /> • The intrinsically safe sensing probe actuates whenever the level of the accumulating liquid <br /> reaches a factory preset level of approximately 3/8" water column. <br /> • The controller,which also provides an intrinsically safe barrier,is connected to the dis- <br /> penser or turbine junction box and operates on either 120 or 240 volts.The controller is fully <br /> encapsulated and is approved for use in Class 1, Group D environments.The unit is capable <br /> of handling up to 20 amps of electrical load. <br /> • The system is easily installed and is connected to existing wiring at the dispenser or tur- <br /> bine location, eliminating the need of pulling new wires or breaking concrete. <br /> • Additional sensing probes may be ordered for use in multiple compartment containment <br /> pans.These probes are available as a Model 406A kit and come complete with a cable <br /> splitter. <br /> • BEI's impact sensor is also compatible with the Model 406. The impact sensor kit is a <br /> Model 408A and also comes with a cable splitter. <br /> • The Model 406 and accessories are third party tested and approved by ETL. <br /> The Model 406 system is patent pending. <br />