Laserfiche WebLink
ZBEAUDREAUMODEL 404 <br /> . PUMP CUT-OFF <br /> BEAUDREAU ELECTRONICS INC. <br /> 1/1/If"'�'�R•Rj����A <br /> BEAUBUEAU ELECTRIC INC <br /> wooe.+a-.urowxo eoxnorx EAU E <br /> 1 <br /> BE,cum I ••••-• "V.nn <br /> Description: <br /> • The Model 404 Pump Cut-Off is asolid state two-part modular system that was specifically <br /> designed for use in containment pans/sumps for dispensers and turbines. The system <br /> functions as a passive device for monitoring an accumulation of fuel spills and/or filter <br /> leaks. When this accumulation reaches a user specified level, the dispenser or turbine is <br /> shut down until the sensor is reset. <br /> • The intrinsically safe sensing probe actuates whenever the level of the accumulating liquid <br /> reaches a factory preset level of approximately 3/8" water column. <br /> • The controller, which also provides an intrinsically safe barrier, is connected to the dis- <br /> penser or turbine junction box and operates on either 120 or 240 volts.The controller is fully <br /> encapsulated and is approved for use in Class 1, Group D environments. The unit is capable <br /> of handling up to 20 amps of electrical load. <br /> • The system is easily installed and is connected to EXISTING wiring at the dispenser or tur- <br /> bine location,eliminating the need of pulling new wires or breaking concrete. <br /> • Additional sensing probes may be ordered for use in multiple compartment containment <br /> pans.These probes are available as a Model 404A kit and come complete with a cable <br /> Isplitter. <br /> • BEI's impact sensor is also compatible with the Model 404. The impact sensor kit is a <br /> I Model 408A and also comes with a cable splitter. <br /> • The Model 404 and accessories are third party tested and approved by ETL. <br /> IThe Model 404 pump cut-off system is patent pending. <br /> - • 11olkyj • E . E <br />