Laserfiche WebLink
FOR AUTHORIZED USER ONLY DO NOT TAMPER ITH THE SYSTEM <br /> 4. Press Enter <br /> Select Action <br /> Clear Alarm <br /> 5. Press Enter <br /> Clear Alarm <br /> i Select Disp : 01 <br /> 6. Press Enter <br /> Alarm <br /> Cleared! <br /> 7. Press Escape twice to return to Monitoring Mode <br /> Disp #01 Status <br /> Fuel : OK <br /> When an Impact Alarm Occurs <br /> When the 508 Impact Sensor detects a vehicular impact at the dispenser, the 522 Monitor will go <br /> into alarm. The horn will sound and the screen will read as follows: <br /> Disp #01 Status <br /> Impact : ALARM <br /> The audible alarm can be silenced by pressing the Mute key on the Monitor. Station personnel <br /> should be instructed to silence the audible alarm and to contact a qualified maintenance <br /> technician. <br /> Maintenance technicians should first check the Monitor screen to determine the nature of the <br /> alarm. If a dispenser has been hit, the maintenance technician should first shut off power to the <br /> affected dispenser at the circuit breaker. The circuit breaker should be locked and/or tagged out <br /> until the dispenser is repaired. <br /> Only after the dispenser has been repaired and the sensors have been replaced should power be <br /> turned on at the dispenser. After turning power back on at the dispenser, the alarm may be <br /> cleared out as follows: <br /> 1. Screen will read: <br /> P-6 <br />