Laserfiche WebLink
Monitoring <br /> Hydrostatic Monitoring System helps <br /> guard against leaks and liabilities. <br /> N0"malConditions CONCREIETRAFFIC PAD� Containment Solutions recommends the Hydrostatic <br /> The reservoir liquid Monitoring System for double-wall tanks because of its <br /> level will be stable if OPTIMAL RESERVOIR superior leak detection capability. By filling the cavity <br /> both the inner and6LIOUIDLEVEL SENSOR: between the inner and outer tank walls with a non- <br /> outer tanks are tl ht. BLE RESERVOIR <br /> 9UDLEVEL hazardous liquid, hydrostatic pressure is continuously <br /> The reservoir sensor applied to both the primary and secondary tank. This <br /> will activate an alarmSTORED system is capable of detecting tank leaks in either the <br /> if the reservoir drainsPRODUCT primary or secondary tank walls for all installed <br /> Or overfills. :DOUBLE-WALL. conditions. <br /> UNDERGROUND <br /> TANK <br /> The Hydrostatic Monitoring System, with a stand pipe, <br /> can also serve the dual function of a precision tank test. <br /> Inner Wall Breach , v o c The system has been independently tested and <br /> Monitor fluid drains statistical) validated to meet the EPA and National Fire <br /> RESERVOIR DRAINS Y <br /> into the primary tank Protection Association's criteria as a precision tank test. <br /> causing the reservoir Using a stand pipe, the system has been shown to be <br /> liquid level to drop capable of detecting leaks as small as 0.10 gallons per <br /> and activate alarm. <br /> INNER WALL hour with a 99.9%probability of detection and less than <br /> m E , <br /> No petroleum product BREACH <br /> a a 1.2% probability of a false alarm. <br /> LL a escapes from the pri- <br /> mary tank to canto All the fiberglass double-wall tanks in this brochure can <br /> urinate the annular include the optional fiberglass reservoir necessary for <br /> space. the Hydrostatic Monitoring System. <br /> Outer Wall Breach The Hydrostatic Monitoring System provides <br /> Groundwater continuous leak detection while avoiding false alarms <br /> ' Below Tank Top `' Qu,= �, caused by changes in product temperature, product <br /> If the groundwater is level, tank deflection under loads, or groundwater <br /> ' <br /> conditions. <br /> below the tank top,the <br /> monitor fluid drains ACCeSSOr18S <br /> into the ground, caus- <br /> ing the reservoir liquid _ Antifreeze Mixtures <br /> ' level to drop and OUTER <br /> BREACHANK In areas where ambient temperatures or delivered <br /> activate the alarm. - - products may be subjected to freezing conditions, an <br /> ' antifreeze solution must be used with our Hydrostatic <br /> Outer Wall Breach <br /> Tank Monitor to avoid potential tank damage. <br /> Groundwater Brine Antifreeze Solution <br /> Over Tank To GROUNDWATER <br /> P LEVEL Our pre-mixed and blended calcium chloride solution <br /> If the groundwater is RESERVOIR provides freeze protection to 40°F.This non-toxic brine <br /> OVERFILLS P <br /> over the tank top, the antifreeze can be factory-installed into tanks measuring <br /> reservoir will fill up up to 10' diameter and 30,000-gallon capacity. Its color <br /> with groundwater and tracer helps detect hidden damage from shipping or <br /> ' activate the high level jobsite handling. <br /> alarm on the reservoir F—OUTER TANK <br /> sensor. <br />