INSTALL_2004 - Laserfiche WebLink

Home Browse Search

Turbine ' Watertight FHP Turbine Enclosure(WTE) Suitable for moderately high groundwater The Watertight FRP Turbine Enclosure includes an FRP enclosure body (variable length in 12"increments, 42' or 48' ID), an FRP reducer (42" x 30" or 48"x 30" ID's) with o-ring groove and o-ring gasket, and a push-on FRP lid (32.5"OD) with 2 handles. The enclosure body is field cemented to the tank collar and the reducer is ' field cemented to the enclosure body using the supplied adhesive kits (Kit AD, 2 kits required). The reducer/ enclosure body joint is on the exterior of the enclosure body allowing easy field installation of the To ': E I to ' adhesive without entering the enclosure. a i. The lid compresses the lubricated o-ring when it is pushed onto the reducer top, providing a watertight s seal with water up to 12" over the lid. The lid can be pushed into position by standing on the lid, which is made with anon-skid exterior surface. The lid ELo L includes two handles. One is offset to aid in the sEALEo JOINT N co removal of the lid and the other is centered on the lid. The 30opening allows for the removal of a 22" \TANKwALL Js manway lid (28" OD). The enclosure must be vented at all times (usually accomplished with the double- Watertight FRP Turbine Enclosure 4 Wall piping). Sealed FRP Turbine Enclosure(STE) Suitable for extremely high groundwater conditions The Sealed FRP Turbine Enclosure includes an FRP enclosure body(variable length in 12"increments,42'or 48" ID's),an FRP reducer(42"or 48"ID's)with-an oval flanged manway(23"x 29"ID's),a flat gasket,SS bolts ,I with non-galling silicone-bronze nuts (optional bolt rings can be supplied to replace the bolts), and an oval FRP lid with handle. The enclosure body is field cemented to the tank collar and the reducer is field cemented to the enclosure body using the optional adhesive kits (Kit AD, 2 kits required). The reducer/enclosure body joint is on the exterior of the enclosure body allowing easy field installation of the adhesive without entering the enclosure. SEPARATOR MATERIAL(48'x 48'z 2') The lid is bolted to the manway with 14 bolts providing a watertight seal with water up to 7' over the lid. The ' - ,• lid can be supplied with an optional 6'NPT fitting with • a plug which can be used as an observation port. The 05 oval manway allows for the removal of a 22" manway s��D lid (28"OD).The enclosure must be vented at all times JOINT (usually accomplished with the double-wall piping). TueaINE P P 9). L ENCLOSURE BODY ' I CONTAINMENT COLLAR FIELD JO NT D 1 45 ^ ' _; Sealed FRP Turbine Enclosure_ TANK WALL